Germany

← Back to catalogue

Dynamic+ Lowering Springs for F3 Audi Q3 2.0T 034-404-1026
  • Dynamic+ Lowering Springs for F3 Audi Q3 2.0T 034-404-1026

Dynamic+ Lowering Springs for F3 Audi Q3 2.0T

Part number: 034-404-1026

Not listed by the manufacturer for your selected vehicle: Audi A7 C8 (2019+) 3.0 TFSI

€303.03

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Dynamic+ Lowering Springs for the F3 Audi Q3 2.0T deliver a noticeable improvement in handling dynamics while maintaining excellent ride comfort. They achieve an aggressive yet balanced stance without reverse rake, offering OEM+ levels of control. Engineered in-house and extensively tested on the F3 Audi Q3 2.0T, they combine performance, comfort, and reliability.

Description

Product Description

These Dynamic+ Lowering Springs are not simply shortened versions of the stock spring. Contrary to common assumption, the overall coil length matches that of the OEM spring. Instead, certain coils are positioned closer together so that they "stack" under load, producing the lowered ride height. Because these coils sit closer to one another, they stack and separate as the suspension compresses and extends.

This coil-stacking behavior is a common characteristic of most aftermarket lowering springs and coilovers, and in some cases even OEM suspension setups, depending on the vehicle's original engineering.

In certain cases, coil stacking under heavy compression can generate additional noise. To address this, Dynamic+ Coil Spring Sleeves are available to dampen noise between the coils. Not every Dynamic+ Lowering Spring requires these sleeves; where needed, a pre-installed pair is included in the correct location.

Why Are Dynamic+ Coil Spring Sleeves Needed?

As described above, the lowered ride height results from coils positioned closer together that stack under load. This design principle applies to many aftermarket springs and suspension setups, and sometimes to OEM suspension as well. When this stacking causes noticeable noise under heavy compression, the included sleeves help dampen the sound generated between the coils.

Features

  • Lowering with a balanced, functional stance – no reverse rake
  • Improved handling performance and chassis dynamics
  • Reduced body roll and understeer
  • Excellent ride comfort and quality
  • Lightweight, high-strength construction
  • Shot peened and powdercoated

Ride Height

  • Front – Approximately 35mm (1.38") lower
  • Rear – Approximately 40mm (1.57") lower

Effective Spring Rates

  • Front – 205 lbs/in
  • Rear – 272 lbs/in
Front Lowering
ca. 35 mm / approx. 35mm (1.38")
Rear Lowering
ca. 40 mm / approx. 40mm (1.57")
Front Spring Rate
205 lbs/in
Rear Spring Rate
272 lbs/in
Surface Treatment
Kugelgestrahlt und pulverbeschichtet / Shot peened and powdercoated
Shipping weight
9.1 kg

–

–

Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products