Germany

← Back to catalogue

Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013
  • Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB and MQB Evo 034-401-4013

Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB & MQB EVO

Part number: 034-401-4013

Fits your vehicle: Volkswagen Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 2.0T Gen3

€245.83

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The Dynamic+ RCO (Roll Camber Optimizer) ball joints noticeably improve handling on lowered Mk7/8 Volkswagen Golf/GTI/Golf R and 8V/8V.5/8Y Audi A3/S3/RS3 models. As a direct replacement for the factory ball joints, they add 1.2° of additional negative camber at each front wheel and raise the roll center by 10mm. Equally suited to street and track use, they deliver a balanced mix of performance, durability, and comfort.

Description

Product Description

The Dynamic+ RCO Camber & Roll Center Adjusting Ball Joints for MQB and MQB-Evo Audi and Volkswagen models are engineered to significantly improve handling on lowered Mk7/8 Volkswagen Golf/GTI/Golf R and 8V/8V.5/8Y Audi A3/S3/RS3 vehicles. Designed as a direct replacement for the factory ball joints, they add 1.2° of negative camber at each front wheel while raising and optimizing the roll center by 10mm.

Dynamic+ RCO Ball Joints are aimed at drivers seeking enhanced handling, increased grip, precise steering response, and maximum stability through corners. Suited for both street and track use, they offer a balanced combination of performance, durability, and comfort. They were extensively tested on the street and at the track across multiple MQB and MQB-Evo development vehicles prior to release, and are finished with a corrosion-resistant nickel-zinc coating for long-term durability.

Roll center refers to the point at which cornering forces in the suspension are transferred to the vehicle body relative to the vehicle's center of gravity. Lowering McPherson strut vehicles negatively affects the roll center, as the pivot point of the lower ball joint shifts, increasing the leverage the center of gravity has on body roll. Installing the Dynamic+ RCO Ball Joints moves the roll center closer to the center of gravity, resulting in greater stability, reduced body roll, and increased traction through corners.

The ball joints also add approximately 1.2° of negative camber at each wheel. This additional camber increases cornering grip, improves steering feel and handling response, and sharpens turn-in for quicker, more consistent lap times. When combined with the Dynamic+ Camber Mounts, front camber is increased substantially further — an ideal setup for drivers prioritizing front-end grip over tire longevity.

Dynamic+ RCO Ball Joints Benefits

  • Reengineered suspension geometry for performance driving
  • Adjusts and optimizes roll center by 10mm
  • Adds approximately 1.2° of negative camber at each wheel (compared to factory ball joints)
  • Significantly enhanced cornering grip
  • Improved steering feel and handling response

Features

  • Corrosion-resistant nickel-zinc coating
  • Direct bolt-in fitment
  • Requires alignment after installation
  • Note: If equipped with a big brake kit, check ball joint-to-rotor clearance before finalizing installation
    • Compatible with Racingline Stage 3 Big Brake Kit
    • Compatible with Macan brake upgrade
    • Not compatible with Stoptech ST60 380mm kit
    • Not compatible with Stoptech ST40 355mm kit

OE Part Interchange

  • 3C0 407 365 B
  • 3C0 407 366 B

What's Included

  • Left ball joint (401-4011)
  • Right ball joint (401-4012)
  • Qty. 6 M10 flanged nuts
  • Qty. 2 M12 flanged nuts
Coating
Nickel-Zink
Additional negative camber
ca. 1,2° pro Rad
Roll center increase
10 mm
Shipping weight
1.6 kg

–

  • Left ball joint (401-4011)
  • Right ball joint (401-4012)
  • Qty. 6 M10 flanged nuts
  • Qty. 2 M12 flanged nuts
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products