Germany

← Back to catalogue

Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033
  • Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033
  • Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033
  • Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033
  • Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033
  • Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo 034-406-2033

Extended Tie Rod End Kit, Audi & Volkswagen PQ35, MQB, and MQB Evo

Part number: 034-406-2033/36Bundle

Not listed by the manufacturer for your selected vehicle: Audi 100/200 Series C3 (1989-1991) I5 20VT - 3B

€101.01

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

Forged-steel tie rod end kit offering 20mm of additional adjustment length over the factory parts. Allows Dynamic+ RCO Ball Joints and Control Arms to be run together safely, since the OE threads run out of engagement with the inner tie rod at the resulting negative camber settings. Developed and tested on the MK7 GTI, 8V A3, 8Y S3, and MK7.5 Golf Alltrack.

Versions
VersionPart numberPrice
Extended Tie Rods - PQ35 & MQB Fitment034-406-2033/36: 034-406-2033€101.01
Extended Tie Rods - MQB Evo Fitment034-406-2033/36: 034-406-2036€101.01

Description

Product Description

This tie rod end kit for Audi and Volkswagen PQ35, MQB, and MQB Evo vehicles features a forged steel body and provides 20mm of additional adjustment length compared to the factory tie rod ends. This allows Dynamic+ RCO Ball Joints and Dynamic+ RCO Control Arms to be installed together without running into thread engagement issues. The added camber and caster adjustment improves handling performance. The forged steel construction makes it suitable for both track and street use.

When both Dynamic+ RCO Ball Joints and Control Arms are installed, the resulting negative camber is great enough that the OE tie rod ends run out of threads for safe engagement with the inner tie rod, preventing proper installation of the factory parts.

The kit was extensively developed and tested on an MK7 GTI, 8V A3, and MK7.5 Golf Alltrack.

Features

  • Re-engineered for performance-driven suspension setups
  • Adds 20mm of adjustment length to the tie rod end
  • Forged steel body for high strength
  • Gloss black finish for corrosion resistance
  • Requires an alignment after installation

Note: This product can only be installed in conjunction with the following kits, individually or together:

  • 034-401-4013, Dynamic+ RCO – Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB & MQB Evo
  • 034-401-1068/77, Dynamic+ RCO Control Arms, Audi & Volkswagen MQB

If neither of these products is installed on your vehicle, the Extended Tie Rod End Kit will not fit.

Installation Effort: Mild

Fitment Notes

Extended tie rods are recommended when running Dynamic+ RCO Ball Joints or Dynamic+ RCO Control Arms with no other camber adder. They are required when using both Dynamic+ RCO Ball Joints and Dynamic+ RCO Control Arms without an adjustable camber mount such as the Dynamic+ Camber & Camster Mount. Extended tie rods should not be used on vehicles without Dynamic+ RCO Ball Joints or Control Arms installed, as they will prevent a proper alignment (e.g., should not be installed if the only camber adder is the Dynamic+ Camber & Camster Mount or other adjustable camber mounts).

Extended tie rods are also compatible with the PQ35 platform (MK5/6 VW & 8P Audi) for vehicles requiring additional front toe adjustment beyond what the OEM tie rods allow. The RCO Ball Joints and Control Arms are not compatible with the PQ35 platform.

Adjustment Ranges

Note: Adjustment ranges were measured on an MK7 GTI running lowering springs. Thread engagement should be verified for your specific setup and subframe alignment. Minimum thread engagement is 10 threads (not including the jam nut).

Configuration Camber Caster
Dynamic+ RCO Control Arms (Extended Tie Rods recommended) -1.3° to -2.5° 7.5°
Dynamic+ RCO Ball Joints (Extended Tie Rods recommended) -2.5° TBC
Dynamic+ RCO Control Arms & Dynamic+ Camber Mount -2.0° to -3.4° 8°
Dynamic+ RCO Control Arms & Dynamic+ Camster Mount -2.1° to -3.5° 9.0°
Dynamic+ RCO Control Arms & Dynamic+ RCO Ball Joints (Extended Tie Rods required) -2.3° to -3.7° 8.0°
Dynamic+ RCO Control Arms, Dynamic+ RCO Ball Joints & Dynamic+ Camber Mount -3.0° to -4.4° 7.5°
Dynamic+ RCO Control Arms, Dynamic+ RCO Ball Joints & Dynamic+ Camster Mount -3.1° to -4.5° 8.5°

All ranges are relative to subframe alignment. Steel and aluminum Subframe Locking Collar Upgrade Kits are recommended accordingly.

OE Part Interchange (MK7 GTI/R)

  • 1K0 423 811 J (Left)
  • 1K0 423 812 J (Right)
  • Top Nut: WHT 005 538
  • Jam Nut: N 011 164 17
Material
Geschmiedeter Stahl / Forged Steel
Additional Adjustment Length
20 mm
Finish
Glänzend schwarz / Gloss Black
Minimum Thread Engagement
10 Gewindegänge / 10 threads

–

Audi (16)
Seat (1)
Skoda (1)
Volkswagen (42)
  • 1x Left Rod End
  • 1x Right Rod End
  • 2x Jamb Nuts
  • 2x Top Nuts
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products