Motorsport StreetSport Engine/Transmission Mount Pair, 8J Audi TTRS 2.5 TFSI 6-MT, Billet Aluminum
Part number: 034-509-5033
€1,298.54
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Engine and transmission mount set for the Audi TTRS 8J 2.5 TFSI with 6-speed manual, machined from billet aluminum and paired with high-durometer rubber. The mounts noticeably reduce engine movement compared to stock while adding only moderate NVH, less than the TrackSport version. Installation effort: difficult, NVH level: medium to high, with a break-in period of roughly 1,000–2,000 miles.
Description
Product Description
The Motorsport StreetSport engine and transmission mounts for the Audi TTRS 8J 2.5 TFSI with 6-speed manual transmission are built for extreme performance applications. Manufactured from billet aluminum paired with high-durometer rubber, they are virtually indestructible while offering better ride quality than polyurethane alternatives. These mounts carry a lifetime warranty regardless of the power level applied or the type of use.
StreetSport mounts are void-free and fluid-free, eliminating the slop associated with the factory engine and transmission mounts. They are fully rebuildable thanks to replaceable Density Line rubber bushings. These heavy-duty mounts result in a moderate increase in noise, vibration, and harshness (NVH) transferred into the cabin, as they significantly reduce engine movement compared to the factory parts, while introducing less NVH than the TrackSport version due to the lower-durometer rubber used. The additional NVH is most noticeable at idle, while NVH during driving is only slightly higher than stock.
High-Durometer Rubber vs. Polyurethane
Density Line mounts are manufactured from high-durometer vulcanized rubber instead of polyurethane. Although rubber mounts are more costly to produce due to higher tooling costs and manufacturing complexity, rubber offers fundamental advantages over polyurethane as a damping medium for mounts and bushings.
Rubber can handle both tension and compression loads, whereas polyurethane is only effective under compression. Rubber also performs well under shear forces, where polyurethane is ineffective, making it well suited for applications involving shear loading during articulation. Unlike polyurethane, rubber does not pack and wear in the same way, resulting in consistent long-term performance.
Buyer's Guide
The following comparison helps determine which mount best suits a given application.
| StreetSport | TrackSport |
|---|---|
| Power levels exceeding Stage 1 | Power levels exceeding conventional stages |
| Car is launched or taken to HPDE or drag events | Car is heavily launched at drag strips or used exclusively for track events |
| Car is used on the road as a daily driver | Ultimate performance and rigidity desired |
| Lower NVH preferred | NVH is not a concern |
Features
- Manufactured from 6061-T6 billet aluminum
- Anodized for durability and appearance
- Extreme-duty design for the most demanding performance applications
- Well suited for highly tuned stock-turbo power levels
- Replaceable 50-durometer Density Line rubber bushings with void-free construction
- Significantly less NVH than the TrackSport version
- Virtually indestructible
- Lifetime warranty
- Reduced drivetrain slop
- Decreased engine movement under load
- More direct power transfer
- Improved shifting feel
- Direct drop-in replacement for factory engine/transmission mounts
- Sold in pairs
Notes
- The lifetime warranty covers replacement of Density Line rubber bushings in the event of wear, and replacement of any billet aluminum component in the unlikely event of failure.
- Material
- 6061-T6 Aluminium-Vollmaterial / 6061-T6 Billet Aluminum
- Rubber Bushing Durometer
- 50 Shore
- Installation Effort
- Schwierig / Difficult
- NVH Level
- Mittel bis hoch / Medium to High
- Break-in Period
- 1000–2000 Meilen / 1,000-2,000 miles
- Sales Unit
- Paar / Pair
- Shipping weight
- 4.8 kg
–
Audi (1)
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Rear Subframe Mount Insert Kit, 8J/8P Audi TT/TTS/TTRS & A3/S3/RS3 Quattro, MkV/MkVI Volkswagen R32 & Golf R034-601-0039€191.07
Audi TTRS 8J & RS3 8P 2.5 TFSI X34 Carbon Fiber Cold Air Intake System034-108-1003€1,167.10
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19
Sway Bar End Links, Motorsport, Rear, Adjustable, Audi 8P/8J, VW MkV/MkVI034-402-4001€279.91
Stainless Steel Subframe Locking Collar Upgrade Kit, 8J Audi TT/TTS/TTRS034-601-0025€337.12
Strut Mount, Track Density, MkV & MkVI Volkswagen, 8J & 8P Audi034-601-1004-TD€96.14






