Germany

← Back to catalogue

P34 Performance Cold Air Intake, 8V Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R, 1.8T/2.0T Gen 3 (MQB) | 034-108-1011
  • P34 Cold Air Intake for 8V Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R | 034-108-1011
  • Mk7 GTI/Golf/R Air Intake Upgrade, 1.8T/2.0T Gen 3 (MQB) | 034-108-1011
  • Mk7 GTI/Golf/R Cold Air Intake, P34 by 034Motorsport | 034-108-1011

P34 Performance Cold Air Intake, 8V Audi A3/S3/TT/TTS & MkVII Volkswagen Golf/GTI/R, 1.8T/2.0T Gen 3 (MQB)

Part number: 034-108-1011

€552.52

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The complete one-piece P34 Air Intake System replaces the factory upper airbox and intake tube, significantly reducing pressure drop in the intake tract. Installation is 100% bolt-on with no additional parts required. Note: This product does not fit vehicles equipped with a MAF sensor – please confirm fitment before ordering.

Description

Optimizing Airflow

Development began with a detailed evaluation of the factory intake system on EA888 Gen 3 1.8T/2.0T engines. While the factory lower airbox and fresh air duct to the core support proved sufficient even at increased power levels, the factory air filter, upper airbox, and turbo inlet tube were identified as restrictive, even with the factory turbocharger installed.

Using a scan of the factory engine bay, a one-piece unit was modeled to replace the factory upper airbox and intake tube. Eliminating multiple couplers, transitions, and jagged features drastically reduced turbulence in the intake tract and virtually eliminated pressure drop ahead of the turbo inlet. Several prototypes were produced via in-house 3D printing and tested extensively. The final design is a fully-enclosed unit with a large-diameter, one-piece intake tube featuring smooth transitions all the way to the factory turbo inlet.

True Cold Air Intake

To ensure the system draws in cool, dense air, an enclosed design was chosen to prevent hot engine bay air from entering the intake tract. By bolting to the factory lower airbox, the enclosed high-flow panel filter continues to draw fresh, cold air from the factory inlet duct ahead of the radiator.

Minimizing Unnecessary Filter Shrouding

A critical factor for a high-flowing intake is allowing air to move freely around and into the filter. Many aftermarket intakes fit oversized filters into housings that cannot accommodate them properly, which chokes the filter and reduces overall flow. Extensive testing was conducted to refine the housing geometry for maximum airflow around and through the filter, resulting in the correct filter size paired with the correct housing size for optimal flow with OEM-level filtration.

Performance Air Filter

The system houses a high-flow panel filter featuring double-layer pleated cotton filtration media, offering increased airflow along with excellent filtering performance.

OEM+ Fit & Finish

The textured finish of the intake tube and upper airbox heat shield was selected to match the factory plastic trim and engine covers. The system is designed to fit like a factory component and mates directly to the turbo inlet pipe and the factory lower airbox.

Dyno-Verified Wheel Horsepower & Torque Gains

Development was validated on a Mustang AWD Dynamometer to confirm repeatable gains in horsepower and torque.

Peak Wheel Horsepower & Torque on Stage 1 2015 Volkswagen GTI:

  • Stock Intake: 223 Wheel Horsepower / 285 Wheel Foot-Pounds of Torque
  • P34 Intake: 240 Wheel Horsepower / 297 Wheel Foot-Pounds of Torque
  • Peak Horsepower Gain: 10 WHP @ 6,100 RPM
  • Peak Torque Gain: 12 WTQ @ 3,100 RPM

Product Features

  • One-piece design with high-quality construction
  • OEM+ fit, retains factory lower airbox and inlet duct
  • Fully-enclosed design with pleated cotton panel air filter
  • Large-diameter, CFD-optimized intake tube
  • Dyno-proven horsepower and torque gains
  • Increased engine and induction sound
  • Improved throttle response
  • Compatible with SAI-equipped and non-SAI-equipped vehicles
  • Straightforward installation

Note

This product is sold for racing use as well as for vehicles not registered for on-highway use and is not legal for use on emissions-controlled highway or street vehicles.

Important: This intake system does not fit vehicles equipped with a MAF sensor. Please confirm your vehicle does not have this sensor before ordering.

Filter Media
Doppellagige, plissierte Baumwolle / Double-layer pleated cotton
Design
Einteilig, vollständig gekapselt / One-piece, fully-enclosed
Shipping weight
3.6 kg

–

  • P34 MQB Air Intake System
  • High-flow panel air filter
  • Integrated SAI adapter fitting
  • Silicone turbo inlet coupler & hose clamps
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products