Germany

← Back to catalogue

S34 Carbon Fiber Intake, Volkswagen Mk8 Golf R & Audi 8Y S3 EA888 Gen 4 034-108-1083
  • S34 Carbon Fiber Intake, Volkswagen Mk8 Golf R & Audi 8Y S3 EA888 Gen 4 034-108-1083
  • S34 Carbon Fiber Intake, Volkswagen Mk8 Golf R & Audi 8Y S3 EA888 Gen 4 034-108-1065
  • S34 Carbon Fiber Intake, Volkswagen Mk8 Golf R & Audi 8Y S3 EA888 Gen 4 034-108-1065
  • S34 Carbon Fiber Intake, Volkswagen Mk8 Golf R & Audi 8Y S3 EA888 Gen 4 034-108-1065

S34 Carbon Fiber Intake for Volkswagen Mk8 Golf R & Audi 8Y S3 (EA888 Gen 4)

Part number: 034-108-1065/1083Bundle

€691.26 – €828.78

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

The S34 Carbon Fiber Intake for the Mk8 Golf R and 8Y S3 improves power, induction sound, and throttle response on the EA888 Gen 4 turbocharged engine. A carbon fiber heat shield adds a clean look while keeping hot engine bay air out of the intake. Also available as the S34 Insuction Bundle with an added Turbo Inlet Pipe for maximum flow to the turbo.

Versions
VersionPart numberPrice
S34 Carbon Fiber Intake034-108-1065/1083: 034-108-1065€691.26
S34 Intake & Turbo Inlet Insuction Bundle034-108-1065/1083: 034-108-1083€828.78

Description

Product Description

This intake system was developed for the turbocharged 2.0T EA888.4 engine found in the MQB-Evo generation Volkswagen Mk8 Golf R and Audi 8Y S3. The S34 Carbon Fiber Intake delivers measurable gains in horsepower and torque, a more aggressive induction and turbocharger sound, and a carbon fiber heat shield that keeps hot engine bay air out of the intake tract.

Multiple designs were modeled, prototyped, and tested throughout development to ensure both measurable performance benefits and precise fitment. The result is an open-airbox design that uses the factory fresh air duct inlet to channel cool outside air to the filter. The large airbox accommodates a 4" inlet conical air filter free of restrictive shrouding, with air routed through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity to the throttle body.

Minimizing Filter Shrouding

A critical factor in a high-flowing intake is allowing air to move freely around and into the filter. If airflow around the filter is restricted, flow into the filter suffers. Many aftermarket kits fit an oversized filter into a housing that can't accommodate it, choking the filter. Extensive testing refined this design to maximize airflow surrounding the filter, resulting in a correctly sized filter in a correctly sized housing for maximum airflow with OEM-level filtration.

Maximizing Airflow

A CFD-optimized 4-ply silicone intake tube replaces the factory plastic accordion/sound-deadening hose. Using CAD software and 3D scanning, the cross-sectional area of the tube was optimized within the factory space constraints, resulting in smooth transitions for optimal airflow to the throttle body.

Performance Air Filter

The S34 Carbon Fiber Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. The enlarged filtration surface increases flow while maintaining superior filtration quality. This filter has been tested in applications exceeding 800 HP with minimal restriction and OEM-quality filtration.

Unlike many intake kits that leave the filter unsupported, a dedicated filter support prevents unwanted movement while allowing compliance for engine movement under load. A stationary air shroud also avoids rubbing against surrounding engine bay components.

Product Features

  • Developed in-house
  • Fits both left- and right-hand drive configurations
  • High-quality carbon fiber air block-off shield
  • High-gloss epoxy finish
  • 4-ply gloss black silicone intake tube
  • OEM+ fit and finish
  • No rubbing or excessive movement
  • Improved airflow over factory airbox and intake tube
    • Stock intake: 474.7 CFM @ 28" H²O
    • S34 intake: 819.4 CFM @ 28" H²O, approx. 53% increase
  • Enhanced induction sound
  • Improved throttle response
  • Large 4" inlet conical pleated cotton air filter
  • Reduced intake air temperature
  • Secure installation using factory mounting grommets
  • Simple, straightforward installation instructions

CFM Gains

CFM stands for cubic feet per minute of airflow. The higher the number, the more horsepower an intake can support. Testing is conducted at 28" of water on a Superflow airflow bench for accurate, repeatable results.

  • Stock intake: 474.7 CFM @ 28" H²O
  • S34 intake: 819.4 CFM @ 28" H²O

S34 Insuction Bundle

The S34 Insuction Bundle combines the S34 Carbon Fiber Intake System with a Turbo Inlet Pipe for maximum flow to the turbo compressor inlet. The MQB-Evo 2.0T Turbo Inlet Pipe is manufactured from 6061-T6 aluminum with a 76mm internal diameter, paired with a machined 6061-T6 billet aluminum compressor inlet flange for smooth air entry into the compressor housing.

The Turbo Inlet Pipe is designed to work with OEM-style turbo inlet hoses, with a bead-rolled edge to securely retain the inlet hose. It features a durable gloss black finish with a laser-etched logo.

Turbo Inlet Adapter Ring

The Turbo Inlet Pipe uses a CNC-machined billet aluminum adapter ring matched to the factory turbo compressor housing, providing smooth air entry between the turbocharger and the Turbo Inlet Pipe while sealing via an O-ring. This design allows the Turbo Inlet Pipe to be adapted to future turbo upgrades with larger compressor housings using correspondingly larger adapter rings.

Emissions Disclaimer

  • This product is sold for racing use as well as for vehicles not registered for on-highway use.
  • It is not legal for use on emissions-controlled highway or street vehicles.
Filter inlet diameter
4 Zoll / 4 inch
Filtration
doppellagiges, gefaltetes Baumwollmedium, 5 Mikron / double-layer pleated cotton, 5 microns
Intake tube
4-lagiges Silikon, schwarz glänzend / 4-ply silicone, gloss black
Stock airflow
474,7 CFM @ 28" H²O / 474.7 CFM @ 28" H²O
S34 airflow
819,4 CFM @ 28" H²O / 819.4 CFM @ 28" H²O
Heat shield material
Carbon, Hochglanz-Epoxidfinish / Carbon fiber, high-gloss epoxy finish
Turbo inlet pipe material
6061-T6 Aluminium / 6061-T6 aluminum
Turbo inlet pipe inner diameter
76 mm / 76mm

–

  • S34 Carbon Fiber Heat Shield
  • S34 4" Inlet Silicone Hose
  • S34 4" Double-Layered Cotton Pleated Filter
  • S34 Secondary Air Injector Adapter
  • S34 Secondary Air Injector Filter
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products