Germany

← Back to catalogue

Stainless Steel Racing Catalyst, B9/B9.5 Audi S4/S5
  • Stainless Steel Racing Catalyst, B9/B9.5 Audi S4/S5
  • Stainless Steel Racing Catalyst, B9 Audi S4/S5 Catalyst View
  • Stainless Steel Racing Catalyst, B9 Audi S4/S5 Angle View
  • Stainless Steel Racing Catalyst, B9 Audi S4/S5 Dyno Chart
  • Stainless Steel Racing Catalyst, B9 Audi S4/S5 Power Gains

Stainless Steel Racing Catalyst, B9/B9.5 Audi S4/S5

Part number: 034-105-4045

Not listed by the manufacturer for your selected vehicle: Audi S6 C5 (2001-2003) 4.2L V8 40V

€1,460.40

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

This stainless steel racing catalyst is a direct bolt-in replacement for the restrictive factory catalytic converter on the B9/B9.5 Audi S4/S5. It delivers increased power and torque across the rev range, quicker turbocharger spool, and a more pronounced exhaust note. Replacing the rear oxygen sensor during installation is recommended, as it commonly fails from over-torquing upon reinstallation.

Description

Product Description

This stainless steel racing catalyst for the B9/B9.5 Audi S4/S5 is designed as a drop-in replacement for the restrictive factory catalytic converter. It eliminates the primary flow limitation in the factory exhaust system, allowing you to unlock additional performance potential from the turbocharged engine. The result is increased horsepower and torque throughout the powerband, reduced turbocharger lag, improved throttle response, and an enhanced exhaust note.

Optimized for increased flow and maximum performance, the catalyst features a 148mm diameter Euro 4 racing catalytic converter in the factory location. This complete drop-in solution includes an integrated v-band flange at the turbine outlet, an integrated oxygen sensor bung after the catalyst, integrated 3-bolt downpipe flanges, and a complete gasket/hardware kit for precise fitment and ease of installation. Constructed from 304 stainless steel for durability and corrosion resistance, it is TIG-welded and includes an integrated OE-style heat isolation barrier to minimize exhaust heat transferred into the engine bay.

The Stainless Steel Racing Catalyst was developed entirely in-house on a development B9 Audi S4, utilizing 3D scanning technology, CAD software, and rapid prototyping techniques. Final production units were extensively track-tested on B9 Audi S4 vehicles before release.

Features

  • Increased horsepower and torque throughout the powerband (+21 HP / +33 TQ peak)
  • Quicker turbocharger spool and faster transient response (150-300 RPM quicker spool)
  • Enhanced exhaust note and turbocharger sounds
  • Direct, bolt-in upgrade for the factory catalytic converter
  • Engineered in-house by the engineering team
  • Factory-location 148mm Euro 4, 200-cell racing catalytic converter
  • 304 stainless steel construction with integrated inlet/outlet flanges and O2 sensor bung
  • Precision CNC-machined flange mating surfaces
  • OE-style heat isolation barrier
  • TIG-welded and backpurged
  • Note: Not for vehicles equipped with GPF (Gasoline Particulate Filter)

Supported Vehicles

  • 2018 - Present Audi S4 (B9/B9.5), 3.0 TFSI
  • 2018 - Present Audi S5 (B9/B9.5), 3.0 TFSI

Performance Comparison (B9 Audi S4 3.0 TFSI, 91 Octane)

 Factory Catalyst (91 Octane)Racing Catalyst (91 Octane)
Peak Horsepower304 HP320 HP
Peak Torque332 FT-LBS348 FT-LBS
Peak HP Gains vs. Factory Catalyst-21 HP @ 5,680 RPM
Peak TQ Gains vs. Factory Catalyst-33 FT-LBS @ 2,525 RPM

Emissions Disclaimer

  • This product is sold for racing use as well as use on vehicles not registered for on-highway use.
  • It is not legal for use on highway or street vehicles.
  • Removal of the factory catalyst requires a Stage 2 racing-use-only calibration to eliminate check engine lights.
Material
304 Edelstahl / 304 Stainless Steel
Catalyst Diameter
148 mm
Cell Count
200 Zellen / 200 Cell
Emissions Standard
Euro 4
Welding Method
WIG-geschweißt, gegengespült / TIG-welded, backpurged
Shipping weight
6.8 kg

–

  • Stainless Steel Performance Downpipe
  • Integrated Euro 4 Racing Catalytic Converter
  • Factory Turbocharger Outlet Gasket
  • Factory Catalyst to Downpipe Gaskets (2)
  • M8 Locknuts (6)
  • M8x30 Socket Head Cap Screws (4)
  • M8 Washers (4)
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products