Supercharger Heat Exchanger Upgrade Kit for Audi C7/C7.5 A6/A7
Part number: 034-102-1010
Not listed by the manufacturer for your selected vehicle: Audi 80/90 Series B3 (1988-1991) I4 8V
€1,567.50
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
High-performance heat exchanger for the supercharged Audi C7/C7.5 A6/A7, installed at the stock location. The significantly larger cooling surface lowers intake air temperature noticeably. Strongly recommended for Stage 1, 2, and 2+ tunes, and required for higher power levels.
Description
Product Description
This heat exchanger upgrade replaces the factory supercharger heat exchanger on the Audi C7/C7.5 A6/A7 at its original stock location. Testing has demonstrated a significant reduction in intake air temperature compared to the factory system. The increased thermal capacity makes this upgrade strongly recommended for Stage 1, 2, and 2+ tunes, and a requirement at higher power levels.
The custom-designed end tanks, CNC machined from billet aluminum, feature configurable coolant paths that can be set up for either single-pass or dual-pass configurations. The oversized core offers 2.4 times the frontal area and 2.2 times the volume of the stock heat exchanger, while still fitting neatly behind the stock crash bar. Custom molded, multilayer silicone hoses ensure a precise fit and excellent durability. These hoses route through included air duct sealing panels, which fill the voids left by the smaller stock heat exchanger and prevent air from bypassing the radiator core. Both end tanks include bleeder plugs, allowing trapped air to be removed from the system without special tools.
This kit provides a complete solution for reducing and stabilizing intake air temperature, suitable for every stage of engine modification, from stock to heavily modified builds.
Features
- Significantly reduces intake air temperature compared to stock
- Frontal area increased by 2.4x
- OE exchanger: 156 sq. in. (1006.5 sq. cm)
- Upgrade exchanger: 370 sq. in. (2387.1 sq. cm)
- Fluid volume increased by 2.2x
- OE exchanger: 1.1 qts.
- Upgrade exchanger: 2.4 qts.
- Dimensional volume increased by 2.1x
- OE exchanger: 31.9in. x 5.5in. x 2.4in. (810mm x 140mm x 60mm)
- Upgrade exchanger: 24.4in. x 17.7in. x 2.0in. (620mm x 450mm x 50mm)
- CNC machined end tanks from 6061 billet aluminum
- Custom molded silicone hoses for a precise fit
- Air duct sealing panels to maintain proper airflow through the radiator
- Bleeder plugs on both end tanks for complete air removal from the system
- Comprehensive kit with 49 components for a correct fit and proper function
- Straightforward, reversible installation
- Note: Modification to the driver side shroud is necessary for hose clearance.
Single-Pass vs. Dual-Pass Configuration
Depending on model year, some vehicles require either a single-pass or dual-pass configuration of the heat exchanger. The configurable coolant paths allow this heat exchanger to be set up for either configuration without additional parts.
Cooling Performance
Testing shows the improved thermal capacity of this heat exchanger compared to the stock unit, with lower intake air temperature as well as a lower coolant outlet temperature. Ambient air temperature during testing was 18°C for the stock unit and 17°C for the upgrade kit.
Power Delivery
Dyno testing on the 3.0TFSI supercharged engine compares power output between the stock heat exchanger and this upgrade. The ECU reduces power once intake air temperature exceeds 80°C. Over consecutive dyno pulls, the stock heat exchanger is unable to keep intake air temperature below 80°C past the first couple of runs, causing the ECU to intervene at progressively lower RPM as the system heat-soaks. With this upgrade installed, intake air temperature stays below 80°C across all six consecutive dyno pulls, allowing consistent power delivery through redline without ECU intervention.
- End tank material
- 6061 Aluminium (Vollmaterial, CNC-gefräst) / 6061 billet aluminum, CNC machined
- OE frontal area
- 156 sq. in. (1006,5 cm²)
- Upgrade kit frontal area
- 370 sq. in. (2387,1 cm²)
- OE fluid volume
- 1,1 qts.
- Upgrade kit fluid volume
- 2,4 qts.
- OE dimensions
- 810 x 140 x 60 mm
- Upgrade kit dimensions
- 620 x 450 x 50 mm
- Number of components
- 49
- Shipping weight
- 9.7 kg
–
- Heat exchanger core
- CNC machined aluminum end tanks
- Multilayer silicone hoses
- Air duct sealing panels
- Mounting hardware (49 components total in kit)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI034-145-Z047-P€1,973.97 – €3,288.338 variants
S34 Carbon Fiber Intake, Audi C7/C7.5 A6/A7 3.0 TFSI034-108-1046€609.72
Billet CREC Supercharger Clutch Delete Kit034-145-2019-STL/TI€284.78 – €840.952 variants
3.0 TFSI Supercharger Bleeder Screw Kit for Audi B8/B8.5/C7/D4 S4/S5/Q5/SQ5/A6/A7/A8034-145-Z043€73.02
X-Clear Driveshaft Tunnel Brace, C7/C7.5 Audi A6/S6/RS6 & A7/S7/RS7034-603-0038€234.88
Transmission Mount Insert Billet Aluminum, C7 Audi A6/S6/RS6 & A7/S7/RS7, 4M/4M.5 Q7034-509-4048€122.92







