X34 Carbon Fiber Cold Air Intake for B5 Audi S4/RS4 2.7T
Part number: 034-108-1002
Not listed by the manufacturer for your selected vehicle: Volkswagen Golf/GTI/Rabbit Mk6 (2010-2014) 2.0 TSI
€724.12
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The X34 Carbon Fiber Cold Air Intake improves power, sound, and throttle response on the B5 Audi S4/RS4 2.7T. By refining the factory airbox design, it increases airflow to the turbocharger and engine while offering straightforward bolt-on installation and excellent fit and finish. A large open-element filter paired with a carbon fiber heat shield ensures cold, dense, filtered air, and an ICM relocation kit is included.
Description
Overview
The X34 Carbon Fiber Cold Air Intake was developed through extensive evaluation of the factory airbox design, resulting in a performance replacement that increases airflow to the turbocharger and engine, supporting up to 800hp. The system is compatible with both stock and aftermarket MAF housings, including Billet 2.7T MAF Housings.
The kit includes a high-quality carbon fiber heat shield, a carbon fiber air duct to the factory fresh air intake at the core support, a performance air filter, and all necessary installation hardware. Also included is a mounting plate for the ignition control modules, aluminum piping, a silicone coupler, hose clamps, and a rubber sealing strip.
Minimizing Unnecessary Filter Shrouding
A critical factor in a high-flowing intake system is allowing air to move freely around and into the filter. If airflow around the filter is restricted, flow into the filter is limited as well.
Many aftermarket kits install an oversized filter in a housing that cannot properly accommodate it, choking the filter and reducing overall flow. Extensive testing was conducted to refine the housing geometry, maximizing airflow around and through the filter.
The result is a correctly sized filter in a correctly sized housing, delivering maximum airflow and performance while maintaining OEM-level filtration.
Performance Air Filter
The X34 intake uses a conical air filter with a double-layer pleated cotton filtration medium, capable of trapping particles as small as 5 microns. The enlarged filtration surface increases airflow while maintaining superior filtration. This filter has been tested in applications over 800hp with minimal restriction and OEM-quality filtration.
Unlike many intake kits that leave the filter unsupported, this system includes a dedicated filter support that prevents unwanted movement while still allowing compliance for engine movement under varying load. The air shroud remains fixed in place and does not rub against surrounding engine bay components, as seen in other designs.
Features
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber intake shield construction
- High-gloss epoxy finish
- OEM+ fit and finish
- Improved fuel economy
- Dyno-proven horsepower and torque gains
- Improved airflow over the factory airbox and intake tube
- Enhanced engine induction sound
- Improved throttle response
- 3.5" inlet conical pleated cotton air filter
- Large-diameter, CFD-optimized carbon fiber filter tube
- Reduced intake air temperature
- Completely reversible installation
What's Included
- Carbon fiber heat shield with fiberglass backing
- Carbon fiber fresh air duct with fiberglass backing
- ICM relocation plate and screws
- 3.5" performance air filter
- Intake pipe
- Silicone coupler set (for stock or 85mm MAF housings)
- Hose clamps (set of 3)
Fitment
- B5 Audi S4 2.7T (2000–2002)
- B5 Audi RS4 2.7T (2000–2002)
- C5 Audi A6 2.7T (1999–2001) – may require slight modification, fresh air duct not compatible
Emissions Disclaimer
This product is sold for racing use as well as use on vehicles not registered for on highway use, and is not legal for use on highway or street vehicles.
- Filter inlet diameter
- 3,5 Zoll / 3.5"
- Filtration rating
- 5 Mikrometer
- Filter material
- Doppellagiges, plissiertes Baumwollmedium / Double-layer pleated cotton
- Heat shield material
- Carbon mit Glasfaser-Unterkonstruktion / Carbon fiber with fiberglass backing
- Shipping weight
- 4.6 kg
–
- Carbon fiber heat shield with fiberglass backing
- Carbon fiber fresh air duct with fiberglass backing
- ICM relocation plate and screws
- 3.5" performance air filter
- Intake pipe
- Silicone coupler set (for stock or 85mm MAF housings)
- Hose clamps (set of 3)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Clutch Slave Hydraulic Pressure Hose, Audi B5 S4 2.7T034-502-3005€223.93
Silicone Breather Hose Kit, B5 Audi S4 & C5 Audi A6 2.7T, Spider Hose Replacement034-101-3071€406.48
Adjustable Solid Rear Sway Bar, B4/B5 Audi S2/RS2 & A4/S4/RS4 Quattro034-402-1001€439.34
Density Line Adjustable Upper Control Arm Kit, B5/B6/B7/C5 Audi A4/S4/RS4 & A6/S6/RS6034-401-1000€724.12
Motor Mount, Density Line, B5, B6, B7, and C5 Audi Models034-509-0007€155.78 – €160.642 variants




