2-Piece Floating Front Brake Rotor Upgrade Kit for Audi B8/B8.5 S4/S5/Q5
Part number: 034-301-1007
€1,268.11
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
345x30 mm two-piece floating brake rotor kit built to match the factory front calipers on the Audi B8/B8.5 S4/S5/Q5. At roughly 8.6 kg per rotor versus the 10.9 kg factory unit, the design cuts rotational weight while retaining sufficient thermal mass and using 72 directionally curved vanes to actively draw air through the disc.
Description
Product Description
This 345x30 mm two-piece front brake rotor upgrade kit is engineered to work with the factory front calipers fitted to the Audi B8/B8.5 S4/S5/Q5 and serves as a complete rotor replacement.
Weighing approximately 8.6 kg per rotor, the kit cuts around 2.3 kg of rotational weight per corner compared to the factory 10.9 kg rotor. Despite the weight savings, the friction ring retains sufficient thermal mass to properly absorb and dissipate braking heat.
The central hat is machined from aircraft-specification 6061-T6 aluminum. The rotor ring is produced from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its shape. Where the factory rotor uses the same straight-vaned design on both sides of the vehicle, this kit features 72 directionally curved vanes that are unique to the left and right side, actively drawing cooling air through the rotor for a notable increase in cooling efficiency over the OE design.
The rotor face uses J-slots to clear the pad surface of debris and allow hot pad outgassing, while producing less braking noise than a traditionally slotted rotor.
The rotor ring and hat are joined via a floating mounting system using high-strength alloy steel bobbins. These pins carry the braking loads while allowing axial and radial float between hat and ring, permitting safe thermal expansion and contraction.
Features
- Lightweight construction (approx. 8.6 kg rotor vs. 10.9 kg OE rotor)
- Floating, two-piece design
- Aerospace-grade aluminum hats with Type III hard anodizing**
- CM-250 special alloy rotor rings
- J-slotted friction face
- OEM fitment and functionality
- 72 curved vanes force cooling air through the rotor
- Directionally curved cooling vanes vs. OE straight-vaned rotors
- Floating bobbin mounting system
- Replaceable rotor rings
- Lower long-term maintenance cost
What's Included
- Two-piece floating front rotor pair
OE Part Interchange
- 8K0 615 301 M
- 4G0 615 301 G
- 4G0 615 301 AF
**Please note: Type III hard anodizing of aluminum is a functional surface coating process. Due to the nature of this process, slight color variation may occur between production batches.
- Rotor Diameter
- 345 mm
- Rotor Thickness
- 30 mm
- Weight per Rotor
- ca. 8,6 kg (19.00 lbs)
- OE Rotor Weight
- ca. 10,9 kg (24.10 lbs)
- Hat Material
- 6061-T6 Aluminium
- Rotor Ring Material
- CM-250 Speziallegierung
- Number of Cooling Vanes
- 72
- Shipping weight
- 17.6 kg
–
- Two-piece floating front rotor pair
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com










