2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B8/B8.5 S4/S5 & Q5/SQ5
Part number: 034-301-2007
Not listed by the manufacturer for your selected vehicle: Volkswagen Jetta/GLI Mk5 (2005-2010) 2.0T FSI
€1,209.69
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
Complete 330x22mm rear brake rotor upgrade kit for Audi B8/B8.5 S4/S5 and Q5/SQ5, engineered to work with the factory rear calipers. At roughly 5.5 kg per rotor, rotational weight drops by about 2 kg per corner compared to the 7.55 kg factory rotor. Despite the weight savings, sufficient thermal mass is retained in the ring, while 72 directionally curved vanes drive effective airflow for heat dissipation.
Description
Product Description
This 330x22mm 2-piece floating rear brake rotor upgrade kit is designed for Audi B8/B8.5 S4/S5 and Q5/SQ5 models and is engineered to work correctly with the factory rear calipers fitted to these vehicles.
At approximately 5.5 kg per rotor, rotational weight is reduced by about 2 kg per corner compared to the 7.55 kg factory rotor. Despite this weight reduction, sufficient thermal mass is retained in the ring to properly absorb and dissipate braking heat.
The central hat section of the rotor is made from 6061-T6 aircraft-specification aluminum. The disc itself is manufactured from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its shape. From the factory, the S4 uses the same straight-veined rotor on both sides. These rotors instead feature 72 directionally curved vanes that actively force cool air through the disc to dissipate heat, and are unique to the left and right axle sides, delivering a notable increase in cooling efficiency over the factory design.
The friction face incorporates J-slot grooves that clean the pad and rotor surface of contaminants and allow hot pad outgassing, while reducing overall braking noise compared to a conventionally slotted rotor.
The rotor and hat are joined via a floating mount system using high-strength alloy steel bobbins. These pins carry the braking loads while allowing axial and radial float between the hat and disc, permitting safe expansion and contraction under heat.
Features
- Lightweight construction (5.5 kg rotor vs 7.55 kg OE rotor)
- Floating 2-piece design
- Aerospace-grade aluminum hats with Type III hard anodizing
- CM-250 special alloy rotor rings
- J-slotted friction face
- OEM fitment and functionality
- 72 curved vanes force cooling air through the brake disc
- Directionally curved cooling vanes vs OE straight-veined rotors
- Floating bobbin mounting system
- Replaceable rotor rings
- Lower long-term maintenance cost
Note: Type III hard anodizing of aluminum is a functional surface coating process. Due to the nature of this process, color variations may occur between production batches.
- Rotor Diameter
- 330mm
- Rotor Thickness
- 22mm
- Weight per Rotor
- 12.15lb (ca. 5,5 kg)
- OE Rotor Weight
- 16.65lb (ca. 7,55 kg)
- Hat Material
- 6061-T6 Aluminium
- Rotor Ring Material
- CM-250 Speziallegierung
- Number of Cooling Vanes
- 72
- Hat Surface Treatment
- Typ-III-Hartanodisierung
- Shipping weight
- 13.6 kg
–
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com









