Germany

← Back to catalogue

2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5 034-301-2008
  • 2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5 034-301-2008
  • 2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5 034-301-2008
  • 2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5 034-301-2008
  • 2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5 034-301-2008

2-Piece Floating Rear Brake Rotor Upgrade Kit for Audi B9/B9.5 S4/S5/SQ5

Part number: 034-301-2008

Not listed by the manufacturer for your selected vehicle: Volkswagen Golf R & R32 Mk5 R32 (2008)

€1,209.69

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

A complete 330x22mm rear brake rotor upgrade kit for the B9 and B9.5 Audi S4/S5/SQ5, designed to fit the factory rear calipers. Each rotor weighs approximately 5.51 kg, saving around 2.04 kg of rotational weight per corner compared to the 7.55 kg factory rotor, while retaining sufficient thermal mass and using 72 curved vanes for strong airflow.

Description

Product Description

This 330x22mm two-piece floating rear brake rotor kit is designed for the B9 and B9.5 Audi S4/S5/SQ5 and is built to work with the factory rear calipers fitted to these models.

Weighing approximately 5.51 kg per rotor, this design reduces rotational weight by around 2.04 kg per corner compared to the 7.55 kg factory rotor. Despite the weight reduction, the rotor rings retain sufficient thermal mass to properly absorb and dissipate braking heat.

The rotor's center hat is machined from aircraft-specification 6061-T6 aluminum. The rotor ring is manufactured from a proprietary metal alloy capable of withstanding high braking temperatures while maintaining its shape. Where the factory uses the same straight-veined rotor on both sides of the vehicle, this kit uses 72 directionally curved vanes to force cooling air through the rotor, with left- and right-specific designs that provide a notable improvement in cooling efficiency over the factory layout.

The rotor face features J-slot grooves that clean the pad and surface of contaminants and allow hot pad outgassing, while keeping braking noise lower than with a traditional slotted rotor.

The rotor and hat are joined through a floating mount system using high-strength alloy steel bobbins. These bobbins carry the braking loads while allowing axial and radial float between hat and ring, enabling the rotor to expand and contract safely under heat.

Features

  • Lightweight construction: 5.51 kg rotor versus 7.55 kg OE rotor
  • Floating two-piece design
  • Aerospace-grade aluminum hats with Type III hard anodizing
  • CM-250 special alloy rotor rings
  • J-slotted friction face
  • OEM fitment and functionality
  • 72 curved vanes force cooling air through the rotor
  • Directionally curved cooling vanes versus OE straight-veined rotors
  • Floating bobbin mounting system
  • Replaceable rotor rings
  • Lower long-term maintenance cost

Note on Anodizing

Type III hard anodizing of the aluminum is a functional surface coating process. As this is a batch-dependent process, slight color variations between production batches may occur.

Diameter x Thickness
330mm x 22mm
Weight per Rotor
5.51 kg (12.15 lb)
OE Rotor Weight
7.55 kg (16.65 lb)
Weight Savings per Corner
2.04 kg (4.50 lb)
Hat Material
6061-T6 Aluminium
Ring Material
CM-250 Spezial-Legierung
Number of Cooling Vanes
72
OE Part Interchange
8W0 615 601 E
Shipping weight
13.6 kg

–

  • Rear 2-piece floating rotor pair
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products