Germany

← Back to catalogue

Adjustable MQB Solid Front Sway Bar Upgrade, MkVII Volkswagen Golf/GTI/R, 8V Audi A3/S3/RS3 & 8S TT/TTS/TTRS | 034-402-1009
  • Adjustable MQB Solid Front Sway Bar Upgrade, MkVII Volkswagen Golf/GTI/R, 8V Audi A3/S3/RS3 & 8S TT/TTS/TTRS | 034-402-1009
  • 034Motorsport MkVII Volkswagen Golf/GTI/R, 8V Audi A3/S3/RS3 & 8S TT/TTS/TTRS Front Sway Bar Mounts, Bushings, Hardware | 034-402-1009

Adjustable Solid Front Sway Bar Upgrade, Volkswagen & Audi MQB and MQB EVO

Part number: 034-402-1009

Not listed by the manufacturer for your selected vehicle: Audi S4 B8/B8.5 (2010-2016) 3.0 TFSI

€466.11

incl. 19% VAT, plus shipping

Delivery time: approx. 2 weeks

Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.

One-piece sport sway bar made from high-quality spring steel for Volkswagen and Audi vehicles based on the MQB and MQB EVO platform. The solid, single-piece construction maximises rigidity, noticeably reduces body roll and sharpens turn-in feel. Maintenance-free, Teflon-lined bushings ensure quiet operation without the need for additional lubrication.

Description

Product Description

This front sway bar for Volkswagen and Audi vehicles on the MQB and MQB EVO platform is machined from a single piece of high-quality spring steel measuring 23.8mm in diameter. The one-piece construction maximises rigidity and provides more feedback from the front axle without significantly compromising ride comfort on the street.

The increased stiffness noticeably reduces body roll in corners and sharpens turn-in response. The bar is two-way adjustable, allowing the rate to be tuned to the intended use.

The sway bar bushings are made from polyurethane with a Teflon and polyester liner. This liner improves the sway bar's response speed while minimising noise, vibration, and harshness (NVH) transmitted into the cabin. The bushings are maintenance-free, require no additional lubrication, and are resistant to water as well as common automotive chemicals. They are heat resistant up to 500°F (260°C) in continuous operation.

Features

  • 23.8mm diameter
  • Solid spring steel construction
  • One-piece design
  • 2-way adjustable
  • Greaseless, maintenance-free, Teflon-lined polyurethane bushings
    • Teflon and polyester composition liner virtually eliminates noise, vibration, and harshness (NVH)
    • Improves sway bar response speed
    • Extended service life
    • No additional lubricant needed, and none should be added
    • Hydrophobic and waterproof, unaffected even in very wet environments
    • Not chemically reactive, unaffected by common automotive chemicals
    • Heat resistant, can operate continuously at temperatures up to 500°F

What's Included

  • Adjustable solid front sway bar for MQB
  • Teflon-lined polyurethane sway bar bushings
  • Billet aluminium sway bar brackets
  • Sway bar bracket installation hardware kit

Sway Bar Rate Data

  • Soft setting: 18.5% rate increase vs. the factory 24mm front sway bar on the Audi S3 (8V)
  • Stiff setting: 40.32% rate increase vs. the factory 24mm front sway bar on the Audi S3 (8V)

Note: It is highly recommended to install an adjustable solid rear sway bar before upgrading the front. Fitting an upgraded front sway bar to a car with a factory rear sway bar will increase understeer and inhibit handling performance.

Note: On lowered vehicles, always check clearances throughout the full range of suspension travel before installation to identify possible interference. It is recommended to run matched suspension components from the same manufacturer, as these are designed and tested to work together without interference.

Recommended Track Alignment Specs

These alignment specifications are intended for a track-driven car with a very loose, oversteer-biased handling balance. They should be used with caution, as they may cause the car to over-rotate or spin, particularly during throttle-lift conditions while turning:

AxleTyresCamberCasterToe
Front265/35-18 Michelin Sport Cup 2-3.0° each side (with increased-range camber strut mounts)7.1° (not adjustable)0.6mm toe-in each side
Rear245/40-18 Michelin Sport Cup 2-1.5° each side–0.8mm toe-in each side
Diameter
23.8 mm
Material
Federstahl / Spring steel
Construction
Einteilig / One-piece
Adjustability
2-fach einstellbar / 2-way adjustable
Bushing material
Polyurethan mit Teflon-/Polyester-Beschichtung / Polyurethane with Teflon/polyester liner
Bushing heat resistance
bis 260 °C (500 °F) / up to 500°F (260°C)
Rate increase (soft)
18,5 % ggü. Audi S3 8V Serienstabilisator / 18.5% vs. Audi S3 8V factory bar
Rate increase (stiff)
40,32 % ggü. Audi S3 8V Serienstabilisator / 40.32% vs. Audi S3 8V factory bar
Shipping weight
7.4 kg

–

  • Adjustable solid front sway bar for MQB
  • Teflon-lined polyurethane sway bar bushings
  • Billet aluminium sway bar brackets
  • Sway bar bracket installation hardware kit
Manufacturer
034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
Responsible person in the EU (importer)
Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com

Matching accessories

Related products