Intercooler System, MK7/7.5 Volkswagen Golf/GTI/R, 8V Audi A3/S3, & 8S Audi TT/TTS 1.8T/2.0T EA888 Gen 3
Part number: 034-145-4010-BLK/-SILBundle
€1,173.19
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
This intercooler system replaces the undersized factory intercooler found on EA888 1.8T and 2.0T equipped MQB Volkswagens and Audis. The core and cast end tanks were optimized using CAD and CFD simulation to deliver strong cooling performance with low pressure drop, feeding the engine consistently cooler, denser air. Available in Black and Silver.
| Version | Part number | Price |
|---|---|---|
| Black | 034-145-4010-BLK/-SIL: 034-145-4010-BLK | €1,173.19 |
| Silver | 034-145-4010-BLK/-SIL: 034-145-4010-SIL | €1,173.19 |
Description
Product Description
This intercooler system is designed to replace the undersized factory intercooler fitted to EA888 1.8T and 2.0T equipped MQB Volkswagens and Audis. The core and cast end tanks were engineered using CAD and CFD software to deliver excellent cooling performance and supply the engine with cooler, denser air for greater performance potential.
Pressure Drop
With intercoolers, bigger is not always better. Pressure drop is the difference in pressure between the inlet and outlet of the intercooler system. Larger volume systems typically generate more pressure drop, take longer to pressurize due to their volume, and have a much higher thermal capacity. With a lower volume intercooler, pressurization is faster and pressure drop is lower, though cooling capacity is also reduced.
Pressure drop on this system was optimized to achieve maximum flow while maintaining high thermal efficiency, resulting in higher boost pressure both before and after the intercooler.
Flow & Efficiency
This intercooler strikes an optimal balance between pressurization volume, thermal capacity, and pressure drop, making it one of the most efficient intercoolers available. It utilizes a 24.6" x 16.25" x 2.0" core, 63% larger than the GTI intercooler and 51% larger than the Golf R intercooler, delivering cooler, denser air to the engine regardless of outdoor temperature. A larger core would have increased pressurization time and introduced unnecessary lag.
Tube and Fin Core Construction
Intercooler cores are built using one of two methods: tube and fin, or bar and plate. Tube and fin construction is lightweight and efficient, shedding heat faster during street, spirited, and track driving. Since intercoolers sit at the front of the vehicle, tube and fin designs also keep weight over the nose significantly lower than bar and plate units, by up to 30 lbs or more.
Bar and plate intercoolers are typically 2–3 times heavier, have higher pressure drop, and offer much greater thermal capacity, but cannot shed heat as quickly due to their mass. As a result, they tend to run at a higher average temperature over time, which is less than ideal under sustained loads during spirited or track driving.
This intercooler system uses a tube and fin design, as found on virtually all professional race cars. Combined with its optimized volume and pressure drop, it performs well for street, spirited, and track driving alike, delivering continuous power without the risk of heat soak. It is suited for vehicles ranging from stock power to Stage 1 or 2 tunes and hybrid turbo setups.
Features
- 24.6" x 16.25" x 2.0" core for transverse 1.8 and 2.0 TSI applications, providing greater frontal area and capacity than the factory intercooler
- 63% increase in volume over the Mk7 GTI
- 51% increase in volume over the Mk7 Golf R / 8V S3
- Cast aluminum end tanks paired with a tube and fin core for strong performance at a lightweight 17.6 lbs
- Optimized using CAD software and CFD analysis for excellent cooling properties of the core and end tanks
- Flow analysis and simulation used to refine the design
- Proven performance gains
- Lowers intake temperatures without significantly sacrificing airflow to the radiator
- Compatible with upgraded replacement radiators
- Relatively straightforward installation
- As easy to install as replacing the factory intercooler
Note: Trimming of the radiator support is required to fit this intercooler, similar to the trimming required for other aftermarket intercoolers on the market.
- Core Dimensions
- 24,6" x 16,25" x 2,0"
- Weight
- 17,6 lbs
- Volume Increase Over Mk7 GTI
- 63%
- Volume Increase Over Mk7 Golf R/8V S3
- 51%
- Core Construction
- Tube and Fin
- End Tanks
- Gussaluminium
–
Audi (7)
Seat (1)
Skoda (1)
–
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
S34 Induction Bundle, Volkswagen & Audi MQB EA888 Gen 3034-108-1077€1,339.92
Turbo Inlet Pipe, 1.8T & 2.0T MQB, Audi 8S-TT/TTS 8V-A3/S3, VW MkVII-Golf/GTI/R A7-Jetta/GLI MQB-Tiguan034-108-5011€156.98
Cast Stainless Steel Racing Downpipe, 8V Audi A3/S3 & MKVII Volkswagen Golf R034-105-4041-AWD€1,237.70
Cast Stainless Steel Racing Downpipe, MKVII Volkswagen Golf/GTI & 8V Audi A3 FWD034-105-4041-FWD€1,168.32













