S34 Induction Bundle, Volkswagen & Audi MQB EA888 Gen 3
Part number: 034-108-1077
Not listed by the manufacturer for your selected vehicle: BMW 5 Series G30 (2016-2020) B57 3.0L
€1,339.92
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The S34 Induction Bundle for Volkswagen & Audi MQB EA888 Gen 3 combines all components needed for a complete intake system upgrade in one package. Included are the S34 Carbon Fiber Intake, the X34 Carbon Fiber Fresh Air Duct, and the Turbo Inlet Pipe. Note: This intake only fits with the smaller GTI battery; AWD vehicles equipped with the larger OE Group 46/H6 battery require a switch to the GTI battery (part number 5K0 915 105 C or 000 915 105 DC, size H5/Group 47, 61Ah, 330A DIN).
Description
Product Description
The S34 Induction Bundle for Volkswagen & Audi MQB EA888 Gen 3 combines three matched components for a comprehensive intake system upgrade: the S34 Carbon Fiber Intake, the X34 Carbon Fiber Fresh Air Duct, and the Turbo Inlet Pipe.
S34 Carbon Fiber Intake
The S34 Carbon Fiber Intake delivers measurable gains in horsepower and torque, a more pronounced induction and turbocharger sound, and a high-quality carbon fiber heat shield that keeps hot engine bay air from entering the intake.
Development included multiple design iterations, prototyping, and testing to ensure measurable performance benefits alongside precise fitment. The result is an open airbox design that uses the factory fresh air duct inlet to channel cool outside air to the filter. The generously sized airbox accommodates a large 4" inlet conical air filter without restrictive shrouding, with air routed through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity toward the throttle body.
Features
- Fits both left-hand and right-hand drive configurations
- High-quality carbon fiber air block-off shield
- High-gloss epoxy finish
- 4-ply gloss black silicone intake tube
- OEM+ fit and finish
- No rubbing or excessive movement
- Dyno-proven horsepower and torque gains
- Improved airflow versus the factory airbox and intake tube
- Enhanced engine induction sounds
- Improved throttle response
- Large 4" inlet conical pleated cotton air filter
- Reduced intake air temperature
- Secure installation using factory mounting grommets
- Straightforward installation instructions
Turbo Inlet Pipe
The Turbo Inlet Pipe eliminates a critical flow restriction in the intake tract to optimize power delivery. It is manufactured from thin-wall 70mm 6061-T6 aluminum for maximum airflow, with a machined 6061-T6 billet aluminum compressor inlet flange that mates smoothly to the compressor housing. Machined 6061-T6 billet aluminum elements retain the original PCV hose fitting and mounting location.
The pipe is designed to work with OEM style turbo inlet hoses, with a bead-rolled edge that securely retains the inlet hose. It features a durable black wrinkle-coat finish and a laser-etched 034 logo.
Features
- 70mm inlet elbow fabricated from thin-wall 6061-T6 aluminum for maximum airflow
- Designed to work with OEM style turbo inlet hoses
- Bead-rolled edge securely retains the inlet hose
- Compressor inlet flange machined from 6061-T6 billet aluminum for smooth airflow into the compressor housing
- Machined 6061-T6 billet aluminum PCV adapter retains the OE PCV hose
- Machined 6061-T6 billet aluminum locating arm maintains the OEM mounting provision
- Durable black wrinkle-coat finish
Carbon Fiber Fresh Air Duct
The Carbon Fiber Fresh Air Duct routes cool, dense air from the front of the car to the airbox. This high-quality carbon fiber piece offers OEM+ fit and finish and is matched to the S34 intake system.
In addition to more direct airflow to the factory airbox, it also provides a noticeable improvement in induction and turbocharger sounds.
Features
- High-quality carbon fiber construction
- OEM+ fit and finish
- Improves airflow from the front of the vehicle to the airbox
- Eliminates the factory plastic blockoff at the core support
- Increases induction and turbocharger sounds
- Simple bolt-in installation
Measurable Performance Gains
Intake system performance can be quantified via pressure drop, CFM airflow, and dyno-measured horsepower and torque. Pressure drop and CFM are the most reliable measures, as they can be quantified under controlled conditions for direct comparison. Dyno figures additionally depend on factors such as ECU tuning, exhaust modifications, and turbocharger upgrades.
CFM Gains
CFM stands for cubic feet per minute of airflow — the higher the figure, the more horsepower the intake can support. Testing was performed at 28" of water on a Superflow airflow bench.
- Stock intake: 553 CFM @ 28" H2O
- S34 intake with 034 Turbo Inlet: 908 CFM @ 28" H2O
Pressure Drop Improvements
Pressure drop is the difference between ambient air pressure and the air pressure measured at the turbocharger inlet across the engine's rpm range. The higher the pressure drop at a given rpm, the more restrictive the intake system is.
| Intake Configuration | Chart Color | Pressure Drop |
|---|---|---|
| S34 Carbon Fiber Intake | Yellow | 0 psi |
| Stock Intake | White | -1.00 psi |
Dyno-Verified Wheel Horsepower & Torque Gains
Development was validated on multiple vehicles using a Mustang AWD dynamometer, confirming gains on both stock and upgraded turbocharger configurations.
Peak Wheel Horsepower & Torque with Stage 1 Software
- Stock intake: 226 WHP / 296 WTQ
- S34 Carbon Fiber Intake: 235 WHP / 305 WTQ
- Peak crank gains: 31 HP and 27 TQ @ 6,000 RPM
Minimizing Unnecessary Filter Shrouding
A critical component of a high-flowing intake is the ability for air to move freely around and into the filter. Many aftermarket kits fit an oversized filter into an enclosure too small to accommodate it, choking the filter and reducing overall flow. Extensive testing refined the airbox design to allow maximum airflow around the filter, pairing the right size filter with the right size housing for maximum flow and OEM-level filtration.
Maximizing Airflow
The CFD-optimized 4-ply silicone intake tube is a direct, high-performance replacement for the plastic factory accordion/sound-deadening hose. Using CAD software and 3D scanning, the cross-sectional area of the tube was optimized within the factory space constraints, resulting in smooth transitions that ensure optimal airflow to the throttle body.
Performance Air Filter
The S34 Carbon Fiber Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. This enlarged filtration surface increases flow while maintaining superior filtration, tested in applications exceeding 800 HP with minimal restriction.
A dedicated air filter support prevents unwanted movement while allowing for engine movement under varying load conditions, and the air shroud remains stationary without rubbing against other engine bay components.
Emissions Disclaimer
- This product is sold for racing use as well as for vehicles not registered for on-highway use.
- It is not legal for use on emissions-controlled highway or street vehicles.
- Air Filter Inlet Diameter
- 4 Zoll / 4 in
- Filter Medium
- Doppellagige, gefaltete Baumwolle / Double-layered pleated cotton
- Filtration Rating
- 5 Mikrometer / 5 Microns
- Turbo Inlet Pipe Material
- 6061-T6 Aluminium / 6061-T6 Aluminum
- Turbo Inlet Pipe Diameter
- 70 mm
- O-Ring Dimensions
- 55 x 3 mm
- Stock CFM (28" H2O)
- 553 CFM
- S34 with Turbo Inlet CFM (28" H2O)
- 908 CFM
- Pressure Drop S34
- 0 psi
- Pressure Drop Stock
- -1,00 psi / -1.00 psi
- Stock Power (Stage 1)
- 226 WHP / 296 WTQ
- S34 Power (Stage 1)
- 235 WHP / 305 WTQ
- Peak Crank Gains
- 31 PS / 27 Nm bei 6.000 U/min / 31 HP / 27 TQ @ 6,000 RPM
- Shipping weight
- 6.4 kg
–
Audi (7)
Seat (1)
Skoda (1)
- S34 Carbon Fiber Heat Shield
- S34 4" Inlet Silicone Hose
- S34 4" Double-Layered Cotton Pleated Filter
- S34 Secondary Air Injector Adapter
- S34 Secondary Air Injector Filter
- Metal Mounting Bracket for Intake Hose
- MQB 1.8T & 2.0T Turbo Inlet Pipe
- 55mm x 3mm Buna-N O-Ring
- M6x1 Socket Head Cap Screw
- Carbon Fiber Fresh Air Duct
- Self-Adhesive Coolant Hose Clamps (Set of 2)
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
S34 Carbon Fiber Intake, Volkswagen & Audi MQB EA888 Gen 3034-108-1044€634.06
Dynamic+ RCO Control Arms, Audi & Volkswagen MQB and MQB Evo034-401-1068/77€682.742 variants
Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB & MQB EVO034-401-4013€245.83
Motorsport StreetSport Engine/Transmission Mount Pair, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI034-509-5034€1,247.43





