Motorsport StreetSport Engine/Transmission Mount Pair Audi 8S TTRS and 8V.5/8Y RS3
Part number: 034-509-5032
Not listed by the manufacturer for your selected vehicle: Volkswagen Golf/GTI/Rabbit Mk7/Mk7.5 (2015-2021) 1.8T Gen3
€1,422.67
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The StreetSport engine and transmission mounts for the Audi 8S TTRS and 8V.5/8Y RS3 set a new benchmark for ultra-high performance applications. Machined from billet aluminum and paired with high-durometer rubber, they are virtually indestructible while offering better ride quality than polyurethane alternatives. A lifetime warranty applies regardless of power level or application. Installation difficulty: difficult. NVH level: medium to high, decreasing after a 1,000–2,000 mile break-in period.
Description
Product Description
The StreetSport engine and transmission mounts for the Audi 8S TTRS and 8V.5/8Y RS3 are engineered for extreme performance demands. Manufactured from billet aluminum and high-durometer rubber, they are virtually indestructible while still delivering better ride characteristics than polyurethane alternatives. A lifetime warranty applies regardless of power level or type of use.
These mounts feature void-free, fluid-free construction, eliminating the play associated with factory engine/transmission mounts. They are fully rebuildable thanks to replaceable Density Line rubber bushings. Because they significantly reduce engine movement compared to factory parts, a moderate increase in noise, vibration, and harshness (NVH) transfer into the cabin can be expected, though less than with the TrackSport mounts due to the lower-durometer rubber used. The additional NVH is most noticeable at idle, while during driving it is only slightly higher than stock.
High-Durometer Rubber vs. Polyurethane
Density Line mounts are manufactured from high-durometer rubber rather than polyurethane. While vulcanized rubber mounts are more complex and costly to prototype due to tooling requirements, rubber is inherently a better damping medium than polyurethane.
Rubber can handle both tension and compression loads, whereas polyurethane only damps effectively under compression. Rubber also performs well under shear forces, where polyurethane is largely ineffective, making it well-suited for applications involving shear loading during articulation. Unlike polyurethane, rubber does not pack down and wear, resulting in a long-lasting part with consistent performance.
Buyer's Guide
The following comparison helps determine which mount suits a given use case.
| StreetSport | TrackSport |
|---|---|
| Power levels exceeding Stage 1 | Power levels exceeding conventional stages |
| Vehicle is launched or used at HPDE or drag events | Vehicle is heavily launched at drag strips or used exclusively for track events |
| Vehicle is used as a daily commuter | Ultimate performance and rigidity desired |
| Lower NVH preferred | NVH is not a concern |
Features
- Manufactured from 6061-T6 billet aluminum
- Anodized for long life and a high-quality finish
- Extreme-duty construction for demanding performance applications
- Well suited for highly tuned, stock-turbo power levels
- Replaceable 50-durometer Density Line rubber bushings with void-free construction
- Significantly less NVH than the TrackSport version
- Virtually indestructible
- Lifetime warranty
- Reduced drivetrain play
- Decreased engine movement under load
- More direct power transfer
- Improved shifting feel
- Complete drop-in replacement for factory engine/transmission mounts
- Sold in pairs
Notes
- Mounting hardware for the motor-side mount is not included, as factory hardware can be reused.
- The lifetime warranty covers replacement of Density Line rubber bushings in case of wear, as well as replacement of any billet aluminum component in the unlikely event of failure.
- Material
- 6061-T6 Aluminium-Vollmaterial / 6061-T6 Billet Aluminum
- Rubber Durometer
- 50 Durometer
- Finish
- Eloxiert / Anodized
- Installation Effort
- Schwierig / Difficult
- NVH Level
- Mittel bis hoch / Medium to High
- Break-in Period
- 1000–2000 Meilen / 1000-2000 miles
- Packaging
- Verkauf im Paar / Sold in Pairs
- Shipping weight
- 5.1 kg
–
Audi (6)
Cupra (1)
- 2 engine/transmission mounts
- Density Line rubber bushings
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
4" Turbo Inlet Pipe, Audi 8S TTRS & 8V.5 RS3034-108-5021€466.11
Adjustable Solid Front Sway Bar Upgrade, Volkswagen & Audi MQB and MQB EVO034-402-1009€466.11
Adjustable MQB Solid Rear Sway Bar Upgrade for Audi RS3 8V/8V.5/8Y & Audi TTRS 8S034-402-1015€453.94
Sway Bar End Link Pair, Motorsport, Front, Adjustable, Volkswagen & Audi PQ35, MQB, and MQB EVO034-402-4002€399.19
Spherical Motorsport Rear Sway Bar End Links, Volkswagen & Audi MQB & MQB EVO034-402-4019€378.49
Billet Aluminum Upper & Lower Dogbone Mount Insert Pair, Volkswagen & Audi MQB And MQB EVO034-509-1022/25 & 034-509-6006/7€119.274 variants
Billet Spherical Dogbone Mount with Billet Aluminum Insert, 8S Audi TT RS & 8V/8V.5 Audi RS3034-509-1026€425.95
Dynamic+ Camber Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1013€516.01
Related products
Motorsport TrackSport Engine/Transmission Mount Pair Audi 8S TTRS and 8V.5/8Y RS3034-509-5030€1,422.67
Motor Mount Pair Hardware Kit for Audi 8S TTRS and 8V.5 RS3034-509-Y022€47.46
Motor Mount Hardware Kit for Audi 8S TTRS and 8V.5 RS3034-509-Y023€17.04
Billet Spherical Dogbone Mount Performance Pack with Dogbone Pucks, Audi 8V.5/8Y RS3 and 8S TTRS034-509-1043€578.08





