S34 Carbon Fiber Intake, Audi B8/8.5 Q5/SQ5 3.0 TFSI
Part number: 034-108-1047
Not listed by the manufacturer for your selected vehicle: Volkswagen Jetta/GLI Mk7 (2019+) 2.0T (Gen 3)
€580.51
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The S34 Carbon Fiber Intake for the Audi B8/8.5 Q5/SQ5 3.0 TFSI improves power output and supercharger sound of the 3.0T engine, combining clean styling with cost-effective performance gains. Installation effort: mild.
Description
Product Description
This comprehensive performance intake solution was developed for the supercharged 3.0 TFSI engine found in the B8 and B8.5 generation Q5 and SQ5. The S34 Carbon Fiber Intake delivers measurable increases in horsepower and torque, a more aggressive induction and supercharger sound, and a carbon fiber heat shield that keeps hot engine bay air out of the intake tract.
Throughout development, multiple designs were modeled, prototyped, and tested to ensure both measurable performance gains and excellent fitment. The result is an open-airbox design that uses the factory fresh air duct inlet to channel cool outside air to the filter. The enlarged airbox allows for a 4" inlet conical air filter free of restrictive shrouding, with air routed through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity to the throttle body.
Minimizing Unnecessary Filter Shrouding
A critical component of a high-flowing intake is the ability of air to flow freely around and into the filter. If airflow around the filter is restricted, flow into the filter is limited as well. Many aftermarket kits fit an oversized filter into an enclosure that cannot accommodate it, choking the filter and reducing its overall flow. Extensive testing was conducted to refine the design for maximum airflow surrounding the filter, resulting in a correctly sized filter in a correctly sized housing that provides maximum airflow and performance with OEM-level filtration.
Maximizing Airflow
A CFD-optimized 4-ply silicone intake tube was developed as a direct replacement for the factory plastic accordion/sound-deadening hose. Using CAD software and 3D scanning, the cross-sectional area of the intake tube was optimized within the factory space constraints. The result is a component that maximizes performance within the available packaging while maintaining smooth transitions for optimal airflow to the throttle body.
SüperDüper Performance Air Filter
While the existing 4" intake filter already supports over 800 hp, this kit includes the SüperDüper 4" air filter for even greater capability. The S34 Carbon Fiber Intake houses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. The enlarged filtration surface increases flow while maintaining superior filtration, with testing conducted on applications exceeding 1200 hp showing minimal restriction and OEM-quality air filtration.
Unlike many intake kits that leave the air filter unsupported, this system includes a dedicated filter support that prevents unwanted movement while still allowing compliance for engine movement under varying load. An added benefit is a stationary air shroud that doesn't rub against other engine bay components as seen in many competing designs.
Product Features
- Developed in-house by the engineering team
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber air block-off shield
- High-gloss epoxy finish
- 4-ply gloss black silicone intake tube
- OEM+ fit and finish
- No rubbing or excessive movement
- Dyno-proven horsepower and torque gains
- Improved airflow from factory airbox and intake tube
- Enhanced engine induction sound
- Improved throttle response
- Large 4" inlet conical pleated cotton air filter
- Reduced intake air temperature
- Securely installs using factory mounting grommets
- Simple, straightforward installation instructions
What's Included
- S34 Carbon Fiber Heat Shield
- S34 4" Inlet Silicone Hose
- S34 SüperDüper 4" Double-Layered Cotton Pleated Filter
- S34 Secondary Air Injector Filter
- Metal Mounting Bracket for Intake Hose
Emissions Disclaimer
- This product is sold for racing use as well as for use on vehicles not registered for on-highway use, and is not legal for use on street-legal vehicles.
Measurable Performance Gains
An intake's performance can be quantified by how freely air flows through the filter and airbox assembly. A restrictive intake limits the amount of air the engine can ingest, which limits the power it can produce. An optimal intake poses no restriction, allowing the engine to take in as much air as possible. Factory intakes typically perform well at stock power levels but become more restrictive as power is increased.
Performance is expressed through pressure drop, CFM airflow, and dyno-tested horsepower and torque. Pressure drop and CFM can be measured precisely under controlled conditions, allowing direct comparison between intake systems. The horsepower test is more variable, as it depends on additional factors such as ECU tuning, exhaust modifications, and turbo or supercharger changes, since the intake itself does not produce power but supports the engine's output.
Pressure Drop Improvements
Pressure drop is the difference between ambient air pressure and the air pressure measured at the supercharger inlet across the engine's rpm range. A higher pressure drop at any given rpm indicates a more restrictive intake system.
| Intake Configuration | Chart Color | Pressure Drop |
|---|---|---|
| S34 Carbon Fiber Intake | Yellow | -0.97 psi |
| Stock Intake | White | -2.18 psi |
CFM Gains
CFM (cubic feet per minute) indicates the airflow an intake can support - the higher the figure, the more horsepower it can support. Testing is conducted at 28" of water on a Superflow airflow bench for accurate, repeatable results.
- Stock Intake: 542 CFM @ 28" H2O
- S34 Intake: 946 CFM @ 28" H2O
Dyno-Verified Wheel Horsepower & Torque Gains
Development was validated on multiple vehicles using a Mustang AWD dynamometer to confirm that the S34 Carbon Fiber Intake provides substantial horsepower and torque increases on both stock and ported supercharger setups.
Peak Wheel Horsepower & Torque with Stage 2+ E40, 57.75/190mm Pulley Combo
- Stock Intake: 416 WHP / 396 WTQ
- S34 Carbon Fiber Intake: 436 WHP / 416 WTQ
- Peak Crank Gains: 26 HP / 24 TQ
- Filter Inlet Diameter
- 4 Zoll / 4 in
- Filtration Rating
- 5 Mikrometer / 5 Microns
- Intake Tube
- 4-lagiges Silikon, glänzend schwarz / 4-ply silicone, gloss black
- Heat Shield Material
- Carbon, hochglänzende Epoxid-Oberfläche / Carbon fiber, high-gloss epoxy finish
- Stock Intake Airflow
- 542 CFM @ 28" H2O
- S34 Intake Airflow
- 946 CFM @ 28" H2O
- Stock Intake Pressure Drop
- -2,18 psi / -2.18 psi
- S34 Intake Pressure Drop
- -0,97 psi / -0.97 psi
- Shipping weight
- 4.5 kg
–
- S34 Carbon Fiber Heat Shield
- S34 4" Inlet Silicone Hose
- S34 SüperDüper 4" Double-Layered Cotton Pleated Filter
- S34 Secondary Air Injector Filter
- Metal Mounting Bracket for Intake Hose
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ Lowering Springs for B8/B8.5 Audi Q5/SQ5034-404-1009€397.96
Dual Pulley Performance Pack, 190mm, Audi B8 S4/S5/Q5/SQ5, C7 A6/A7, D4 A8 3.0 TFSI034-145-Z047-P€1,973.97 – €3,288.338 variants
Supercharger Heat Exchanger Upgrade Kit for Audi B8/B8.5 Q5/SQ5034-102-1002€1,584.53
Drivetrain Mount Insert Package, Billet Aluminum, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 & Porsche 95B Macan034-509-6000€357.80
Transmission Mount Insert, B8 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5 Billet Aluminum034-509-4014€108.31
X-Brace Billet Aluminum Chassis Reinforcement, B8/B8.5 Audi A4/S4/RS4, A5/S5/RS5, Q5/SQ5, Allroad, & 95B Porsche Macan034-603-0008€915.18

















