S34 Carbon Fiber Intake, Volkswagen Mk8 Golf GTI EA888 Gen 4
Part number: 034-108-1064/1082Bundle
€648.66 – €743.60
incl. 19% VAT, plus shipping
Delivery time: approx. 2 weeks
Motorsport product: no approval papers (ABE, parts certificate, registration) can be supplied. Fitting it may void the vehicle's type approval for road use.
The S34 Carbon Fiber Intake for the Volkswagen Mk8 Golf GTI delivers improved power, induction sound, and overall performance to the turbocharged EA888 Gen 4 four-cylinder in an attractive, clean, and cost-effective package. It is also available as part of the S34 Insuction Bundle, which adds a turbo inlet pipe for maximum airflow to the turbocharger. Installation effort: easy.
| Version | Part number | Price |
|---|---|---|
| S34 Intake & Turbo Inlet Insuction Bundle | 034-108-1064/1082: 034-108-1082 | €743.60 |
| S34 Carbon Fiber Intake | 034-108-1064/1082: 034-108-1064 | €648.66 |
Description
Product Description
Significant development effort went into this comprehensive intake solution for the turbocharged 2.0T EA888.4 engine found in the MQB-Evo generation Volkswagen Mk8 Golf GTI. The S34 Carbon Fiber Intake delivers measurable increases in horsepower and torque, a more aggressive induction and turbocharger sound, and a carbon fiber heat shield that keeps hot air from the engine bay out of the intake.
Throughout development, multiple designs were modeled, prototyped, and tested to ensure measurable performance benefits along with excellent fitment. The result is an optimized open-airbox design that uses the factory fresh-air duct inlet to channel cool outside air to the filter. The large airbox accommodates a 4" inlet conical air filter free of restrictive shrouding, with air then routed through a CFD-optimized 4-ply silicone inlet hose that smoothly increases air velocity to the throttle body.
Minimizing Unnecessary Filter Shrouding
A critical factor in a high-flowing intake is the ability of air to flow freely around and into the filter. If airflow around the filter is restricted, overall flow into the filter suffers. Many aftermarket kits fit oversized filters into enclosures too small to properly accommodate them, choking the filter and reducing its effective flow. Extensive testing and refinement went into this design to allow maximum airflow around the filter as well as through it. The result is a correctly sized filter in a correctly sized housing, delivering maximum airflow and performance while maintaining OEM-level filtration.
Maximizing Airflow
A CFD-optimized 4-ply silicone intake tube was developed as a direct replacement for the factory plastic accordion/sound-deadening hose. Using CAD software and 3D scanning, the cross-sectional area of the tube was optimized within the factory space constraints. The result is a tube with smooth transitions that ensures optimal airflow to the throttle body.
Performance Air Filter
The S34 Carbon Fiber Intake uses a high-flow conical air filter with a double-layer pleated cotton filtration medium capable of trapping particles as small as 5 microns. The enlarged filtration surface increases flow while maintaining superior filtration. This filter has been tested in applications exceeding 800 HP with minimal restriction and OEM-quality filtration.
Unlike many intake kits that leave the filter unsupported and prone to movement, this design includes a filter support that prevents unwanted movement while still allowing compliance for engine movement under varying load. The air shroud remains stationary and does not rub against surrounding engine bay components, unlike many designs on the market.
Product Features & Details
- Developed in-house
- Fits both left- and right-hand drive configurations
- High-quality carbon fiber air block-off shield
- High-gloss epoxy finish
- 4-ply gloss black silicone intake tube
- OEM+ fit and finish
- No rubbing or excessive movement
- Improved airflow over the factory airbox and intake tube
- Stock intake: 371.63 CFM @ 28" H²O
- S34 intake: 460.53 CFM @ 28" H²O (~24% increase)
- Enhanced engine induction sound
- Improved throttle response
- Large 4" inlet conical pleated cotton air filter
- Reduced intake air temperature
- Secure installation using factory mounting grommets
- Simple, straightforward installation instructions
What's Included
- S34 carbon fiber heat shield
- S34 4" inlet silicone hose
- S34 4" double-layered cotton pleated filter
- S34 secondary air injector adapter
- S34 secondary air injector filter
- S34 secondary air adapter cap
CFM Gains
CFM stands for cubic feet per minute of airflow; the higher the number, the more horsepower an intake can support. All intakes are tested at 28" of water on a Superflow airflow bench, providing accurate and repeatable results.
- Stock intake: 371.63 CFM @ 28" H²O
- S34 intake: 460.53 CFM @ 28" H²O
S34 Insuction Bundle
The S34 Insuction Bundle combines the S34 Carbon Fiber Intake System with a Turbo Inlet Pipe to deliver the highest possible flow to the turbo inlet. The MQB-Evo 2.0T Turbo Inlet Pipe is manufactured from 6061-T6 aluminum with a 66mm internal diameter for maximum airflow, featuring a machined 6061-T6 billet aluminum compressor inlet flange for smooth air entry into the compressor housing.
The Turbo Inlet Pipe is designed to work with OEM-style turbo inlet hoses, with a bead-rolled edge that securely retains the hose. It features a durable gloss black finish with a laser-etched logo.
Turbo Inlet Adapter Ring
The Turbo Inlet Pipe utilizes a CNC-machined billet aluminum adapter ring matched precisely to the factory turbo compressor housing. This oval-shaped adapter ring provides smooth air entry between the turbocharger and the Turbo Inlet Pipe, sealed with an O-ring. The adapter ring design allows the Turbo Inlet Pipe to adapt to future turbo upgrades with larger compressor housings via corresponding larger adapter rings.
Emissions Disclaimer
- This product is sold for racing use as well as use on vehicles not registered for on-highway use.
- It is not legal for use on emissions-controlled highway or street vehicles.
- Stock Intake Airflow
- 371,63 CFM bei 28" H²O
- S34 Intake Airflow
- 460,53 CFM bei 28" H²O
- Filter Micron Rating
- 5 Mikron
- Intake Tube Material
- 4-lagiges Silikon
–
- S34 carbon fiber heat shield
- S34 4" inlet silicone hose
- S34 4" double-layered cotton pleated filter
- S34 secondary air injector adapter
- S34 secondary air injector filter
- S34 secondary air adapter cap
- Manufacturer
- 034Motorsport, Inc., 42968 Osgood Rd, Fremont, CA 94553, USA, contact@034motorsport.com
- Responsible person in the EU (importer)
- Tij-Power, Thorsten Meier, Mühlenheide 91, 33106 Paderborn, info@tij-power.com
Matching accessories
Dynamic+ RCO - Camber & Roll Center Adjusting Ball Joints, Volkswagen & Audi MQB & MQB EVO034-401-4013€245.83
Dynamic+ Camber Mount Pair, Volkswagen & Audi MQB and MQB EVO034-601-1013€516.01
Adjustable Solid Rear Sway Bar Upgrade, Volkswagen & Audi MQB And MQB EVO FWD034-402-1008€416.21
Motor Mount Pair, Density Line, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI034-509-5020€429.60
Billet Spherical Dogbone Mount, Volkswagen & Audi MQB and MQB EVO with 7-Speed DSG034-509-1039€425.95
Stainless Steel Braided Brake Line Kit, Volkswagen & Audi MQB and MQB EVO with 2.0T TFSI (Performance Pack)034-303-0016€206.89












